Installation Guide

IDSA Reference Testbed Installation (CA-DAPS-DSC-MDB)

Index

The installation and configuration process is explained below for each of the components. To further support this document, the links to the official installation guides will be linked.

Execution modes

You may either run the preconfigured testbed offered in this repo or follow the instructions for the manual setup below to set it up on your own and possibly adjust it to your needs.

Hardware Requirements

In this section the minimum requirements required for operating the IDS-testbed are detailed.

The current minimum requirements for the IDS-Testbed are:

4 GB RAM (however 8GB RAM is recommended)
50 GB storage

It is recommended to use 64bit quad core processor to provide enough processing power for all docker containers.

Take into account that if more components are included at the IDS-testbed or a huge amount of data is uploaded it is possible to run out of disk free space. In this cases it is recommended to provide more free disk storage.

Target View: Preconfigured testbed

Follow this section to automatically launch the Preconfigured set up of the Testbed.

Setting up requirements

The software required for the successful deployment of the testbed is the following:

OS: Ubuntu 20.04.1 LTS
Docker: 20.10.7
Docker-compose: 1.27.4

First, verify your ubuntu version

lsb_release -a

the output should be similar to this

No LSB modules are available.
Distributor ID: Ubuntu
Description:    Ubuntu 20.04 LTS
Release:        20.04
Codename:       focal

Then update your system with

sudo apt-get update
sudo apt-get upgrade

Install docker and docker-compose

sudo apt-get install docker
sudo apt-get install docker-compose

verify install with

docker version

The output should look similar to

Client:
 Version:           20.10.7
 API version:       1.41
 Go version:        go1.13.8
 Git commit:        20.10.7-0ubuntu5~20.04.2
 Built:             Mon Nov  1 00:34:17 2021
 OS/Arch:           linux/amd64
 Context:           default
 Experimental:      true

docker-compose version

The output should look similar to

docker-compose version 1.27.4, build unknown
docker-py version: 4.3.1
CPython version: 3.8.10
OpenSSL version: OpenSSL 1.1.1f  31 Mar 2020

If your docker-compose version is not the required one, execute the following command:

sudo apt-get install curl
sudo curl -L "https://github.com/docker/compose/releases/download/1.27.4/docker-compose-$(uname -s)-$(uname -m)" -o /usr/local/bin/docker-compose
sudo chmod +x /usr/local/bin/docker-compose

Download the IDS-testbed to your local environment.

sudo apt install git
git clone https://github.com/International-Data-Spaces-Association/IDS-testbed.git

Move to the downloaded directory and execute the docker-compose.yml script.

cd IDS-testbed
docker-compose up

If you face problems with docker or user right, execute the following commands and log out and back so that your group membership is re-evaluated.

sudo groupadd docker
sudo usermod -aG docker $USER 
# Where $USER is obtained by executing in the terminal the command `whoami`
# Log out and log back in so that your group membership is re-evaluated.

Re-execute the docker-compose.yml script.

The process of downloading the images and launching the containers of the different components (DAPS, DSC and MDB) will begin.

The IDS-testbed will be correctly deployed. The components that are part of the IDS-testbed can be reached at the URLs mentioned below.

DAPS:

can be reached at https://localhost:443
needs to be preconfigured to know connector A, B and the Broker

Connectors:

connector A
- can be reached at https://localhost:8080
- needs to be preconfigured with a self-description and offering a dataset ("hallo world")
connector B
- can be reached at https://localhost:8081
- needs to be preconfigured with a self-description and offering a dataset ("goodbye world")

Broker:

can be reached at https://localhost:444
needs to be aware of connector A, connector B and store their self-descriptions

Target View: Manual testbed set up

Follow this section to manually launch the Testbed.

Setting up requirements

The software required for the successful deployment of the testbed is the following:

OS: Ubuntu 20.04.1 LTS
Docker: 20.10.7
Docker-compose: 1.27.4
Java: 11
Maven: 3.6.3
Ruby: 2.7.0
Python3

First, verify your ubuntu version

$lsb_release -a

the output should be similar to this

No LSB modules are available.
Distributor ID: Ubuntu
Description:    Ubuntu 20.04 LTS
Release:        20.04
Codename:       focal

Then update your system with

sudo apt-get update
sudo apt-get upgrade

docker and docker-compose

As we need to run different components at the same time, install docker and docker-compose

sudo apt-get install docker
sudo apt-get install docker-compose

verify install with

docker version

The output should look similar to

Client:
 Version:           20.10.7
 API version:       1.41
 Go version:        go1.13.8
 Git commit:        20.10.7-0ubuntu5~20.04.2
 Built:             Mon Nov  1 00:34:17 2021
 OS/Arch:           linux/amd64
 Context:           default
 Experimental:      true

In some environments, e.g. WSL2, you might have to start the docker daemon manually by calling dockered .

docker-compose version

The output should look similar to

docker-compose version 1.27.4, build unknown
docker-py version: 4.3.1
CPython version: 3.8.10
OpenSSL version: OpenSSL 1.1.1f  31 Mar 2020

Java and maven

Some components like the Data Space Connector require Java 11. Install it with

sudo apt install openjdk-11-jdk

verify install with

java -version

The output should look similar to

openjdk version "11.0.13" 2021-10-19
OpenJDK Runtime Environment (build 11.0.13+8-Ubuntu-0ubuntu1.20.04)
OpenJDK 64-Bit Server VM (build 11.0.13+8-Ubuntu-0ubuntu1.20.04, mixed mode, sharing)

To avoid problems while building components you should set the JAVA_HOMEenvironment variable on your system.
HINT: you might want to check with jrunscript -e 'java.lang.System.out.println(java.lang.System.getProperty("java.home"));'

To enable the build process of the Data Space connector we install maven

sudo apt-get install maven

verify install with

mvn -version

The output should look similar to

Apache Maven 3.6.3
Maven home: /usr/share/maven
Java version: 11.0.13, vendor: Ubuntu, runtime: /usr/lib/jvm/java-11-openjdk-amd64
Default locale: en, platform encoding: UTF-8
OS name: "linux", version: "5.13.0.28-generic", arch: "amd64", family: "unix"

Python

The CA script provided with the IDS testbed requires python. Install it with

sudo apt install python3
sudo apt install python3-openssl

Ruby

The Omejdn Daps runs on Ruby. Setup Ruby by calling

sudo apt install ruby

Other tools

Some additional tools that might be useful

sudo apt install curl

sudo gem install jwt

Installation of the components

First, let us set up the network with

docker network create testbed_local

Download the Testbed

sudo apt install git
git clone https://github.com/International-Data-Spaces-Association/IDS-testbed.git

CERTIFICATE AUTHORITY

Move to right directory, and make the files executable:

cd IDS-testbed/CertificateAuthority

Follow the documentation detailed at the "README.md" file which covers the scope, dependencies and usage of the component.

The preconfigured setup includes certificates for:

a root CA called "ReferenceTestbedCA"
a subCA called "ReferenceTestbedSubCA"
certificates for devices called "connectorA", "connectorB", "broker", "daps" and "connectorA_revoked"

which are located at CertificateAuthority/data-cfssl folder.

Continue here after the official documentation has been followed

The Certificate Authority provides {CERT_FILENAME}.crt and {CERT_FILENAME}.key formats. Keep in mind that other formats will be required for the different components. Those have to be created.

Now convert the generated certificates in data/cert using openssl to then use in the Connector and DAPS.

## navigate to the following directory data/cert
cd data-cfssl/cert
ls

The output should look similar to

{CERT_FILENAME}.crt  {CERT_FILENAME}.key

Obtain a .p12 file format from the current .crt and .key formats:

## .crt + .key -> .p12
openssl pkcs12 -export -out {CERT_FILENAME}.p12 -inkey {CERT_FILENAME}.key -in {CERT_FILENAME}.crt -passout pass:password
## .p12 -> .cert
openssl pkcs12 -in {CERT_FILENAME}.p12 -out {CERT_FILENAME}.cert -nokeys -nodes -passin pass:password

You should now have two additional files in data-cfssl/cert

{CERT_FILENAME}.cert  {CERT_FILENAME}.crt  {CERT_FILENAME}.key  {CERT_FILENAME}.p12

The certificate chain (CA, SubCA, Certs) has been created and the user should be able to create as many certificates as they need for their environment.

DAPS

The official documentation of the Omejdn DAPS is here: https://github.com/International-Data-Spaces-Association/omejdn-daps

Adding the keys to the DAPS

Every client that wants to use the local Omejdn DAPS must place their {CERTFILE}.cert file in the keys directory.

The directory can be found in

DAPS/keys

Add the certificate provided by the local CA, newly created by the local CA or provided by Fraunhofer AISEC. Place the certificate at the folder DAPS/keys/omejdn/ with name omejdn.key to avoid dependency issues later on.

Adding the clients to the DAPS

Note: The user must execute the register_connector.sh file in order to add the client to the Omejdn DAPS. Once executed, the certificate will be included in the DAPS's list of clients.

To execute the script

cd DAPS
./register_connector.sh {CERT_FILENAME}

It could look something like this

./register_connector.sh connectorA

The certificate will be added to the list of DAPS's clients. You can check it at the file DAPS/config/clients.yml

Required changes in the configuration

Change the configuration file .env with your favorite editor, e.g. nano.

nano .env

Note The file could be hidden. Select the option show hidden files and it should be placed at IDS-testbed root directory.

Replace the following lines with the necessary configuration. It could look something like this

COMPOSE_PROJECT_NAME=testbed
OMEJDN_ENVIRONMENT="production"
OMEJDN_PROTOCOL="https"
OMEJDN_VERSION="1.6.0"
OMEJDN_DOMAIN="omejdn"
OMEJDN_PATH="/auth"

ADMIN_USERNAME="admin"
ADMIN_PASSWORD="password"

TLS_KEY="${PWD}/DAPS/keys/TLS/daps.key"
TLS_CERT="${PWD}/DAPS/keys/TLS/daps.cert"

Configure the docker-compose.yml file with your configuration. Then run the Omejdn DAPS server.

The docker-compose.yml could look something like this

services

  omejdn:
    image: nginx:1.21.6
    container_name: omejdn
    ports:
      - 80:80
      - 443:443      
    environment:
      - OMEJDN_DOMAIN=${OMEJDN_DOMAIN}
      - OMEJDN_PATH=${OMEJDN_PATH}
      - UI_PATH=${UI_PATH}
    volumes:
      - ./DAPS/nginx.conf:/etc/nginx/templates/default.conf.template
      - ./DAPS/keys/TLS/daps.cert:/etc/nginx/daps.cert
      - ./DAPS/keys/TLS/daps.key:/etc/nginx/daps.key
    networks:
      - local

  omejdn-server:
    image: ghcr.io/fraunhofer-aisec/omejdn-server:${OMEJDN_VERSION}
    container_name: omejdn-server
    environment:
      - OMEJDN_ISSUER=${OMEJDN_ISSUER}
      - OMEJDN_FRONT_URL=${OMEJDN_ISSUER}
      - OMEJDN_OPENID=true
      - OMEJDN_ENVIRONMENT=${OMEJDN_ENVIRONMENT}
      - OMEJDN_ACCEPT_AUDIENCE=idsc:IDS_CONNECTORS_ALL
      - OMEJDN_DEFAULT_AUDIENCE=idsc:IDS_CONNECTORS_ALL
      - OMEJDN_ADMIN=${ADMIN_USERNAME}:${ADMIN_PASSWORD}
    volumes:
      - ./DAPS/config:/opt/config
      - ./DAPS/keys:/opt/keys
    networks:
      - local
      
networks:
  local:
    driver: bridge

Place the local CA created certificate at the folder DAPS/keys/TLS/ and name it as daps.crt and daps.key to match the above mentioned docker-compose.yml file configuration.

DATASPACE CONNECTOR:

The testbed will have two built-in Connectors. They will be referred to as ConnectorA and ConnectorB. They will have different configurations, so they will each have their own directory. These directories are going to be referred to as DataspaceConnectorA and DataspaceConnectorB.

It is recommended to follow the guide with one Connector at a time to avoid configuration issues.

Make sure you are in the right directory:

cd IDS-testbed/DataspaceConnectorA/

cd IDS-testbed/DataspaceConnectorB/

Component Documentation

The official documentation will cover the introductions, deployment, documentation and communication guide of the component.

Official documentation: https://github.com/International-Data-Spaces-Association/DataspaceConnector/tree/v8.0.2

Continue here after reading the official documentation

Official configuration documentation: https://international-data-spaces-association.github.io/DataspaceConnector/Deployment/Configuration#configuration

The Dataspace Connector must be configured to work in this environment.

Define the PostgreSQL containers

Define the PostgreSQL container to be used by DataspaceConnectorA and DataspaceConnectorB. For the IDS-testbed deployment it is configured at the docker-compose.yml file.

It could look something like this (ConnectorA)

  postgresa:
    image: postgres:13
    container_name: 'postgresa-container'
    ports:
      - "5432:5432"
    environment:
      - POSTGRES_USER=postgresusera
      - POSTGRES_PASSWORD=password
      - POSTGRES_DB=connectoradb
    volumes:
      - connector-dataa:/var/lib/postgresql/data
    networks:
      - local

volumes:
  connector-dataa: {}

It could look something like this (ConnectorB)

  postgresb:
    image: postgres:13
    container_name: 'postgresb-container'
    ports:
      - "5433:5432"
    environment:
      - POSTGRES_USER=postgresuserb
      - POSTGRES_PASSWORD=password
      - POSTGRES_DB=connectorbdb
    volumes:
      - connector-datab:/var/lib/postgresql/data
    networks:
      - local

volumes:
  connector-datab: {}

Changes to the application.properties file

The configuration necessary for the application properties is located at the src/main/resources/application.properties folder of the official DSC repository.

For the IDS-testbed deployment it is configured at the docker-compose.yml. Here it is detailed the port, daps configuration and the server ssl keystore. It is also defined the PostgreSQL database setup.

    ports:
      - 8080:8080
    environment:
      - DAPS_URL=https://omejdn
      - DAPS_TOKEN_URL=https://omejdn/auth/token
      - DAPS_KEY_URL=https://omejdn/auth/jwks.json
      - DAPS_INCOMING_DAT_DEFAULT_WELLKNOWN=/jwks.json
      - SERVER_SSL_KEY-STORE=file:///conf/connectorA.p12
      # Define the PostgreSQL setup
      - SPRING_DATASOURCE_URL=jdbc:postgresql://postgresa:5432/connectoradb 
      - SPRING_DATASOURCE_PLATFORM=postgres
      - SPRING_DATASOURCE_DRIVERCLASSNAME=org.postgresql.Driver
      - SPRING_DATASOURCE_USERNAME=postgresusera
      - SPRING_DATASOURCE_PASSWORD=password
      - SPRING_JPA_DATABASE_PLATFORM=org.hibernate.dialect.PostgreSQLDialect

The server server.ssl.key-store=file:///config/{TLS_FILENAME}.p12, where {TLS_FILENAME} is to be replaced with the certificate created previously by the local CA. The Dataspace Connector expects the TLS certificate in .p12 format.

Note Make sure the created certificates have the correct permissions. For the Dataspace Connector this .p12 format certificate must be configured with read and write rights for the user permissions and group permissions. The file permissions can be viewed and changed using the following commands:

ls -l
chmod 664 {TLS_FILENAME.p12}

Changes to the config.json file

Use nano or your most favourite editor

nano DataspaceConnectorA/conf/config.json

Deployment Mode

Edit connectorDeployMode from TEST_DEPLOYMENT to PRODUCTIVE_DEPLOYMENT for the connector to request and validate incoming DATs

  "ids:connectorDeployMode" : {
    "@id" : "idsc:PRODUCTIVE_DEPLOYMENT"

Dataspace Connector KeyStore

  "ids:keyStore" : {
    "@id" : "file:///conf/{CERT_FILENAME}.p12"

{CERT_FILENAME} will be a certificate from the local CA or external to this testbed, provided by Fraunhofer AISEC (Contact Gerd Brost).

Ensure {CERT_FILENAME} are different for ConnectorA and ConnectorB

Note: Local CA certs will be available. Users can use those, create new ones or bring their own FH cert to replace {CERT_FILENAME}.

Open the `conf` directory

DataspaceConnectorA/conf/

Ensure the {CERT_FILENAME}.p12 file used for ids:keyStore is placed in this directory for the config.json to access it

Modify the truststore.p12 for the Connector to accept these new TLS certificates. Make sure the {TLS_FILENAME}.crt is in this directory and then

keytool -import -alias {NAME} -file {NAME.crt} -storetype PKCS12 -keystore {truststore.p12}

It could look something like this (ConnectorA)

keytool -import -alias connectorA -file connectorA.crt -storetype PKCS12 -keystore truststore.p12

It could look something like this (ConnectorB)

keytool -import -alias connectorB -file connectorB.crt -storetype PKCS12 -keystore truststore.p12

It could look something like this (Metadata Broker)

keytool -import -alias metadatabroker -file broker.crt -storetype PKCS12 -keystore truststore.p12

It could look something like this (Omejdn DAPS)

keytool -import -alias omejdn -file daps.crt -storetype PKCS12 -keystore truststore.p12

You will be asked the following in the terminal:

Enter keystore password: , type password
Trust this certificate? [no]: , type yes

It should return:

Certificate was added to keystore

Ensure both connectorA.crt and connectorB.crt are imported into the truststore.p12

When using the DSC for clarity reasons modify the following lines

Put a meaningful description to your connector

"ids:connectorDescription" : {
    "@type" : "ids:BaseConnector",
    "@id" : "https://w3id.org/idsa/autogen/baseConnector/7b934432-a85e-41c5-9f65-669219dde4ea"

Put a meaningful URL that uniquely identifies your connector towards the IDS Metadata Broker.

"ids:accessURL" : {
        "@id" : "https://localhost:8080/api/ids/data"

It could look something like this (ConnectorA)

"ids:connectorDescription" : {
    "@type" : "ids:BaseConnector",
    "@id" : "https://connector_A"

"ids:accessURL" : {
        "@id" : "https://connectora:8080/api/ids/data"

It could look something like this (ConnectorB)

"ids:connectorDescription" : {
    "@type" : "ids:BaseConnector",
    "@id" : "https://connector_B"

"ids:accessURL" : {
        "@id" : "https://connectorb:8081/api/ids/data"

Additional Changes

For the use of this testbed, the Dataspace Connector must be built via docker-compose.

The testbed is run in a docker network defined earlier in this document called testbed_local.

Configure the docker-compose.yml file with your configuration. The docker-compose.yml could look something like this for the DataspaceConnectorA.

services

  connectora:
    image: ghcr.io/international-data-spaces-association/dataspace-connector:8.0.2
    container_name: connectora
    ports:
      - 8080:8080
    environment:
      - CONFIGURATION_PATH=/config/config.json
      - DAPS_URL=https://omejdn
      - DAPS_TOKEN_URL=https://omejdn/auth/token
      - DAPS_KEY_URL=https://omejdn/auth/jwks.json
      - DAPS_INCOMING_DAT_DEFAULT_WELLKNOWN=/jwks.json
      - SERVER_SSL_KEY-STORE=file:///conf/connectorA.p12
      # Define the PostgreSQL setup
      - SPRING_DATASOURCE_URL=jdbc:postgresql://postgresa:5432/connectoradb 
      - SPRING_DATASOURCE_PLATFORM=postgres
      - SPRING_DATASOURCE_DRIVERCLASSNAME=org.postgresql.Driver
      - SPRING_DATASOURCE_USERNAME=postgresusera
      - SPRING_DATASOURCE_PASSWORD=password
      - SPRING_JPA_DATABASE_PLATFORM=org.hibernate.dialect.PostgreSQLDialect
    volumes:
      - ./DataspaceConnectorA/conf/config.json:/config/config.json
      - ./DataspaceConnectorA/conf/connectorA.p12:/conf/connectorA.p12
      - ./DataspaceConnectorA/conf/truststore.p12:/config/truststore.p12
    networks:
      - local
    depends_on:
      - postgresa
            
networks:
  local:
    driver: bridge

DSC will not fly without a DAPS token now. Make sure the DAPS runs first.

METADATA BROKER

Component Documentation

The official documentation will cover the pre-requisites, installation and deployment of the component.

Official documentation: https://github.com/International-Data-Spaces-Association/metadata-broker-open-core

Continue here after reading the official documentation

Download the component from the official repository

cd IDS-testbed
git clone -b 5.0.3 https://github.com/International-Data-Spaces-Association/metadata-broker-open-core.git

Use the downloaded component to build the broker-core image.

Changes to the application.properties file

Use nano or your most favourite editor.

nano broker-core/src/main/resources/application.properties

DAPS

This will make use of the locally installed DAPS.

# DAPS
# daps.url=https://daps.aisec.fraunhofer.de
daps.url=https://omejdn/auth/token
daps.validateIncoming=true

Add the local DAPS to the trusted hosts

# Security-related
...
jwks.trustedHosts=daps.aisec.fraunhofer.de,omejdn
ssl.certificatePath=/etc/cert/server.crt
ssl.javakeystore=/etc/cert/isstbroker-keystore.jks

Changes to the component's keystore

At the folder broker-core/src/main/resources/ add the certificate provided by the local CA, newly created by the local CA or provided by Fraunhofer AISEC. If it is NOT provided by the local CA, make sure it is correctly added to the local DAPS.

keytool -importkeystore -srckeystore {SRCKEYSTORE} -srcstoretype {STORETYPE} -srcstorepass {SRCSTOREPASS} -destkeystore {DESTKEYSTORE} -deststoretype {DESTSTORETYPE} -deststorepass {DESTSTOREPASS}

It could look something like this

keytool -importkeystore -srckeystore broker.p12 -srcstoretype pkcs12 -srcstorepass password -destkeystore isstbroker-keystore.jks -deststoretype jks -deststorepass password

Expected outcome:

"Import command completed:  1 entries successfully imported, 0 entries failed or cancelled"

To check the content of the created keystore, use the following command:

keytool -v -list -keystore {KEYSTORE}

It could look something like this

keytool -v -list -keystore isstbroker-keystore.jks

Build the broker-core image

Go to the main directory and build the project with maven:

cd metadata-broker-open-core
mvn clean package

This will create a .jar file in broker-core/target that will have to be copied into docker/broker-core.

cp broker-core/target/broker-core-5.0.3.jar docker/broker-core

Once the file is copied, move to the docker/broker-core directory and place there the TLS certificate that corresponds to the DAPS. For the IDS-testbed it is located at DAPS/keys/TLS/daps.cert and use the following command to change the certificate format to daps.crt

openssl x509 -inform PEM -in daps.cert -out daps.crt

Then build the core image locally using the following command.

cd docker/broker-core
docker build -t registry.gitlab.cc-asp.fraunhofer.de/eis-ids/broker-open/core:5.0.3 .

Adding the TLS certificates

At the IDS-testbed/MetadataBroker/ folder place the TLS certificates created by the local CA together with the keystore.

server.crt
server.key
isstbroker-keystore.jks

Usage

Take the content from the file metadata-broker-open-core/docker/composefiles/broker-localhost/docker-compose.yml and copy it at your docker-compose.yml file. Use nano or your most favourite editor.

nano docker-compose.yml

Use the TLS certificates and ensure the container names are consistent with other dependencies by adding container_name:.

If port 443 is already in use, the reverseproxy container will exit with code 1. Follow the steps in the next block to get around this:

services:
  broker-reverseproxy:
    image: registry.gitlab.cc-asp.fraunhofer.de/eis-ids/broker-open/reverseproxy
    container_name: broker-reverseproxy
    volumes:
      - ./MetadataBroker/server.crt:/etc/cert/server.crt
      - ./MetadataBroker/server.key:/etc/cert/server.key
    ports:
      - "443:443" # Change to a port of your choosing if taken: "{PORT}:443"
      - "80:80" # Change to a port of your choosing if taken: "{PORT}:80"
    networks:
      - local

  broker-core:
    image: registry.gitlab.cc-asp.fraunhofer.de/eis-ids/broker-open/core:5.0.3
    container_name: broker-core
    volumes:
      - ./MetadataBroker/isstbroker-keystore.jks:/etc/cert/isstbroker-keystore.jks
    environment:
      - SPARQL_ENDPOINT=http://broker-fuseki:3030/connectorData
      - ELASTICSEARCH_HOSTNAME=broker-elasticsearch
      - SHACL_VALIDATION=true
      - DAPS_VALIDATE_INCOMING=true
      - COMPONENT_URI=https://localhost/
      - COMPONENT_CATALOGURI=https://localhost/connectors/
      - DAPS_URL=https://omejdn/auth/token
    expose:
      - "8080" 
    networks:
      - local

  broker-fuseki:
    image: registry.gitlab.cc-asp.fraunhofer.de/eis-ids/broker-open/fuseki
    container_name: broker-fuseki
    volumes:
      - broker-fuseki:/fuseki
    expose:
      - "3030"
    networks:
      - local
      
volumes:
  broker-fuseki:

networks:
  local:
    driver: bridge

Go to the compose file and build the Metadata Broker

docker-compose up

Stop and delete testbed set up

In this section it is detailed how to automatically stop and delete IDS-testbed set up.

Be aware that following this section will stop and delete all the containers launched by the IDS-testbed. It will also remove the docker-compose.yml file configuration regarding the images of the different components and the associated docker volumes and network.

Move to your IDS-testbed downloaded directory and execute the following command

docker-compose down --rmi all -v

This is the expected outcome

Stopping connectorb          ... done
Stopping omejdn              ... done
Stopping broker-reverseproxy ... done
Stopping broker-core         ... done
Stopping broker-fuseki       ... done
Stopping omejdn-server       ... done
Stopping omejdn-ui           ... done
Stopping connectora          ... done
Removing connectorb          ... done
Removing omejdn              ... done
Removing broker-reverseproxy ... done
Removing broker-core         ... done
Removing broker-fuseki       ... done
Removing omejdn-server       ... done
Removing omejdn-ui           ... done
Removing connectora          ... done
Removing network testbed_local
Removing volume testbed_broker-fuseki
Removing image nginx:1.21.6
Removing image ghcr.io/fraunhofer-aisec/omejdn-server:1.6.0
Removing image ghcr.io/fraunhofer-aisec/omejdn-ui:dev
Removing image ghcr.io/international-data-spaces-association/dataspace-connector:8.0.2
Removing image ghcr.io/international-data-spaces-association/dataspace-connector:8.0.2
WARNING: Image ghcr.io/international-data-spaces-association/dataspace-connector:8.0.2 not found.
Removing image registry.gitlab.cc-asp.fraunhofer.de/eis-ids/broker-open/reverseproxy
Removing image idstestbed/broker-core:5.0.3
Removing image registry.gitlab.cc-asp.fraunhofer.de/eis-ids/broker-open/fuseki

As seen above, the containers have been stopped and deleted. The network, volumes and images used by the docker-compose.yml file have also been deleted.

Last updated 2 months ago

IDSA Reference Testbed Installation (CA-DAPS-DSC-MDB)

Index

Execution modes

Hardware Requirements

Target View: Preconfigured testbed

Setting up requirements

Target View: Manual testbed set up

Setting up requirements

Installation of the components

Download the Testbed

CERTIFICATE AUTHORITY

Continue here after the official documentation has been followed

DAPS

Adding the keys to the DAPS

Adding the clients to the DAPS

Required changes in the configuration

DATASPACE CONNECTOR:

Component Documentation

Continue here after reading the official documentation

Define the PostgreSQL containers

Changes to the application.properties file

Changes to the config.json file

Deployment Mode

Dataspace Connector KeyStore

Open the conf directory

When using the DSC for clarity reasons modify the following lines

Additional Changes

METADATA BROKER

Component Documentation

Continue here after reading the official documentation

Changes to the application.properties file

DAPS

Security-related

Changes to the component's keystore

Build the broker-core image

Adding the TLS certificates

Usage

Stop and delete testbed set up

Open the `conf` directory